Overview
The HP 300 SE preamplifier is a further development of the legendary HP 300 MK2. It expands the Octave preamplifier range primarily through the large variety of connections. The HP 300 SE also offers outstanding sound quality thanks to improvements in the power supply and the output stage of the line amplifier. The newly developed line stage has an extremely high signal-to-noise ratio.
Technology
The HP 300 SE goes beyond the HP300 MK2 in many ways. The most important are an external power supply with significantly advanced power supply technology, improved amplifier circuitry, amplification in 3 gain stages, XLR out with transformers and improved housing optics. The further development of the HP 300 into the HP 300 SE closes the gap to high-priced precursors. The sophisticated technology and the use of specialized output transformers in the XLR output make it an audiophile treat.
External Power Supply
The power supply of the HP 300 SE consists of the external mains transformer with optimized mains filter characteristics and precise, extremely low-noise voltage regulators in the preamplifier. Both systems are perfectly coordinated and audibly reduce the noise and interference levels of the HP 300 SE. The balanced output is constructed with a precision balancing transformer. This transformer makes it possible to switch the ground connection to the power amplifiers on or off. This feature is helpful to prevent leakage current from the ground connection of the connected devices. Noise is caused not only by the specific properties of the tubes, but also by impurities in the network or interference within the power supply. In principle, these mains leakage currents are always present and have a negative influence on the sound. This is history with the HP 300 SE.
Additional Features
The OCTAVE HP 300 SE is a real all-rounder. It has two independent XLR inputs, three RCA inputs, a monitor output, two RCA outputs and one XLR output. The equipment is rounded off by a monitor output, which can be used for a headphone amplifier or any recording device, or the A/D input of a PC. The HP 300 SE optionally offers a phono MC input with a variety of setting options.
The gain can be selected in three levels, which allows the overall gain to be optimally adjusted to the efficiency of the speakers. Both outputs, XLR and RCA, have a very low output resistance. This means that cable lengths of up to 10m to the power amplifier have no negative influence. A helpful feature in modern systems is the multi-channel bypass (home theater function). The HP 300 SE also offers the option of selecting the bypass function for an RCA or XLR input.
Key Features
- Low noise external power supply
- Soft-start electronics to maximize tube life
- Adjustable gain setting to match the efficiency of your loudspeakers
- Home theater bypass function
- 3 dedicated RCA inputs
- 2 dedicated XLR inputs
- 2 pairs of dedicated RCA outputs
- 1 pair of dedicated XLR outputs w/ground lift
- 1 RCA fixed level tape monitor output
- Optional MM or MC phono input
